A consolidation test (Taylor, 1948) was conducted on a sample of soft Chicago silty clay. The specimen had a dry weight of 343.57 g and a density of solids of 2.65 Mg/m3. The area of the ring was 93.31 cm2. A displacement transducer was used, which has a precision of one ten thousandth of an inch (1 x 10-4 in), and the incremental stresses applied to the specimen were recorded in kgf/cm2. Direct measurements of the thickness of the specimen were as follows:
1.254 in when under 1/8 kg/cm2
1.238 in when under 1/2 kg/cm2
1.215 in when under 1 kg/cm2
Deformations to the nearest 10-4 in recorded during the test are listed in Table P9.14. Required:
(a) Use a spreadsheet to plot the e versus log σ’ and/or the e versus log σ’ curve for this test.
Determine the pre-consolidation stress and the appropriate compression index.
(b) Use a spreadsheet to plot dial reading versus (t) 1/2 for each increment and determine cv. Plot cv versus log σ’.
(c) Same as part (b) only use the Casagrande log time-fitting method.
(d) For two increments, one before and one after the pre-consolidation stress, compare the values of cv as determined by the two fitting procedures
SOLUTION
Adjust loads to stresses:
Determine e:
Vs = Ms / ps = 0.34357 kg / 2650 kg/m3 * (100 cm)3 / m3 = 129.649 cm3
Vt = area * height = (93.31 cm2) (1.254 in) * 2.54 cm / in = 297.207 cm3
Vv = Vt – Vs = 297.207 cm3 – 129.649 cm3 = 167.53 cm3
eo = Vv / Vs = 167.56 cm3 / 129.649 cm3 = 1.292
Determine strain, Ɛ: % strain = (deformation reading) * 10-4 / 1254 in * 100
Determine e (e1) at each load:
∆e = Ɛ(1 + eo); ei = eo – ∆e
ei = eo – Ɛ(1 + eo) (refer to table and plot for solutions)
Transducer
Load Effective Stress Reading Vertical Strain Void Ratio
(kg/cm2) (kPa) (10-4 in) (%) e
0.125 12.263 -- -- 1.292
0.25 24.525 47 0.3748 1.283
0.5 49.050 149 1.1882 1.265
1 98. 100 385 3.0702 1.222
2 196.200 1343 10.7097 1.047
4 392.400 2201 17.5518 0.890
8 784.800 2902 23.1419 0.762
16 1569.600 3536 28.1978 0.646
Unlock the complete assignment
You are viewing the free preview. Purchase this assignment once to reveal the complete resource.
Secure checkout is completed by Stripe.



